Windows 10 users have lately reported a new unknown USB Device Error, which occurs suddenly and causes many inconveniences every 30 seconds. The stop code says, “Device_Descriptor_Failure” or “Device Descriptor Request Failed,” & the USB device simply refuses to get recognized by your system. The same Windows 10 Error can occur while connecting your SD Card, and your PC is unable to read the SD Card properly. Fortunately, we have covered a plethora of solutions to resolve the problem. If you missed it, you can check it here: How To Fix ‘SD Card Not Detected’ on Windows?
Must-Read: Signs, Causes & Ways To Repair Corrupted SD Card On Windows 10 PC
| Table Of Contents: |
|---|
| PART 1: One-Stop Solution To Fix USB Device_Descriptor_Failure Error In Windows 10 |
| PART 2: Best Workarounds To Fix USB Device Error: Device_Descriptor_Failure |
PART 1: One-Stop Solution To Fix USB Device_Descriptor_Failure Error In Windows 10Well, updating USB Drivers is one of the best bets to resolve this annoying Windows 10 stop code. If your PC is running problematic USB drivers (maybe outdated, corrupted, broken, or missing), you can most likely witness the Device_Descriptor_Failure Error In Windows 10. If you are a computer novice and have no idea how to repair or replace faulty USB Drivers, then it is highly recommended that you use a professional driver updater utility like Smart Driver Care. It thoroughly scans your computer to find problematic device drivers, and you can fix them instantly in a few clicks. To know more about Smart Driver Care, you can check the review here!
(Limited Time Offer – Lifetime Free Access To Photo Editing Software – Photo Studio) How To Install Best-Match USB Drivers With Smart Driver Care?Well, it’s single scan will help you replace your currently installed outdated or faulty drivers with the latest & correct versions, all installed from trustworthy and official sources. STEP 1- Install & Open Smart Driver Care on your Windows PC. The driver updater software is highly compatible with almost all Windows versions. STEP 2- On the registered versions, click on the Start Scan button to let the professional driver updater utility scan your system and locate all the problematic drivers. (If you are using the free version of Smart Driver Care, note that it allows you to find and update two drivers only each day.)
STEP 3- You can go through the list of faulty drivers and locate the USB Drivers requiring immediate attention. You can click on the Update button next to the defective USB driver and update them individually. Or, you can simply hit the Update All button to fix every driver in one-go!
STEP 4- It will take a few moments for Smart Driver Care to install and replace the latest USB Drivers and other faulty driver versions. Once your PC is running correctly compatible with and latest drivers, you’ll hopefully eliminate the Device Descriptor Request Failed problem! |
You Might Be Interested In This: How To Disable & Enable USB Ports On Windows 10?
PART 2: Best Workarounds To Fix USB Device Error: Device_Descriptor_Failure
For most users, updating USB Drivers works like a charm to fix this annoying stop code. In case you are still struggling with the vicious loop of Device Descriptor Request Failed Problem. Try the following ways:
| Best Ways (2020) | {Resolved}: USB Device Error: Device_Descriptor_Failure |
|---|---|
| METHOD 1- Reinsert The Power Supply | In case the problem is caused due to Power Supply, we recommend you reinsert the power supply. |
| METHOD 2- Run The Troubleshooter | Running Hardware & Devices Troubleshooter can be a handy fix to eliminate this Windows 10 stop code. Apply the below-mentioned steps to execute the devices’ troubleshooter. |
| METHOD 3- Disable USB Selective Suspend Settings | Disabling the USB Selective Suspend Settings has helped fix the annoying USB device error for numerous Windows users. So, let’s follow the steps below to fix the issue! |
| METHOD 4- Disable Fast Startup | Although the fast startup feature is dedicated to making your PC boot faster, multiple users have reported that it is responsible for hampering the external USB devices not getting recognized by PCs. So, let’s temporarily disable it & see if it fixes the Device Descriptor Request Failed Problem. |
METHOD 1- Reinsert The Power Supply
Follow the instructions carefully:
STEP 1- Unplug the power plug from your device.
STEP 2- Insert the Power supply again & reboot your PC.
Now connect the USB device in the USB Port and see if it fixes the USB Device_descriptor_failure issue in Windows 10!
METHOD 2- Run The Troubleshooter
Follow the instructions carefully:
STEP 1- Navigate to the Windows 10 search box and look for Troubleshooting settings.
STEP 2- Select the very first result that appears on the top of the screen.
STEP 3- From the next window, hit the View all option to expand the categories correctly.
Now look for the Hardware and Devices menu. Follow the on-screen instructions to finish the troubleshooting process. Connect the USB device in the USB Port and see if it fixes the stop code: Device_descriptor_failure issue in Windows 10!
METHOD 3- Disable USB Selective Suspend Settings
Follow the instructions carefully:
STEP 1- Go to the Control Panel and navigate to the Power Options.
STEP 2- Navigate to the Change plan settings and click on Change advanced power settings.
STEP 3- Go to the USB Settings > Double-click to expand the category to find USB selective suspend settings > Double-click again and change both the settings to Disabled.
Click the OK button, followed by the Apply button, to implement the changes.
METHOD 4- Disable Fast Startup
Follow the instructions carefully:
STEP 1- Launch the Run window. You can press Windows key + R together to get the Run window pop-up. Type Control Panel & hit the OK button!
STEP 2- From the next window, navigate to the System and Security module.
STEP 3- Now go to the Power options.
STEP 4- Followed by Choose what the power buttons do from the left-side panel.
STEP 5- Now hit the ‘Change settings that are currently unavailable’ option.
STEP 6- Locate the Shutdown settings and uncheck the “Turn on fast startup” (recommended) feature. Click on the Save changes button and reboot your computer successfully.
Let the feature be temporarily disabled & observe if you are still witnessing the Device_Descriptor_Request_Failed stop code on Windows 10. You can enable the fast startup feature the same way!
Subscribe Now & Never Miss The Latest Tech Updates!
Forb
Yup! maybe an outdated driver seemed to be the issue.. updated it and fixed the issue..