Deployment of Image Servicing and Management, or DISM, is a built-in Windows program that may be used with PowerShell or the command line. One of its commands, DISM /online /cleanup-image /restorehealth, has several optional options. When your computer has trouble starting up, or updating its operating system, or you notice any faulty files in the image, you can utilize the DISM Restore Health Command. When you launch the DISM online cleanup image restorehealth, it will begin scanning your system for corrupt files and replace them with good-state files to resolve the problem.
If you are facing issues with the DISM command stuck on your PC then here are a few expert-recommended methods that you need to follow.
Also Read: How To Fix The DISM Error 0x800F082F On Windows?
Best Ways To Fix DISM /online /cleanup-image /restorehealth Is Stuck
Method 1: Wait For Some Time
The extent of the damage that needs to be corrected determines how long the DISM restorehealth will take. The longer it takes to mend them, the more corrupt they are. The entire process could take several hours, and you can just wait and see. If the progress bar’s percentage has not changed for a while, you might think about fixing the issue.
Also Read: 5 Ways to Resolve the Dism.exe 1392 Error on Windows 10
Method 2: Verify The Command You Just Typed
You must confirm that the command is accurate for the process to function normally. Any extra spaces could affect the outcome. Simply check the command carefully.
Also Read: How to Fix DISM Host Servicing Process High CPU Usage
Method 3: Reboot Your PC
Many services and programs are operating in the background while you use your computer, even if some of them are unnecessary. When your computer has a lot of background processes and services running, it can become slower and have unforeseen issues, such as DISM /online /cleanup-image /restorehealth taking a very long time. Simply restart your computer to close any unwanted services and programs.
Also Read: How to use DISM to Repair Windows 10
Method 4: Check The RAM On Your Computer
If your machine doesn’t have enough RAM, using DISM instructions could cause problems. Your machine running Windows 10 or Windows 11 should be able to handle 4 GB of RAM. DISM /online /cleanup-image /restorehealth might easily become stuck when executing if your RAM is less than 4 GB.
Also Read: How To Fix ‘Another Instance Is Running’ Error On Windows?
Method 5: Activate CHKDSK
To scan your system for faults and fix them, run CHKDSK.
Step 1: From the taskbar, click the search icon and type cmd or Command Prompt.
Step 2: The first outcome is the Command Prompt under Best Match. Click on the Run As Administrator option.
Step 3: Enter the command chkdsk C: /f /r into the Command Prompt and press Enter to execute it.
You can try running DISM /online /cleanup-image /restorehealth or DISM.exe /online /cleanup-image /restorehealth in Command Prompt again after completing these instructions to see if it can finish successfully.
Also Read: How To Fix The “Code Execution Cannot Proceed” Error On Windows PC?
Method 6: Launch SFC
To fix missing or damaged system files on your Windows 10/11 PC, utilize the System File Checker (SFC) program.
Step 1: Start the Command Prompt as an administrator.
Step 2: Run sfc /scannow by typing it into the Command Prompt and pressing Enter.
Step 3: Hold off until the scan is complete.
Also Read: How To Fix The “Access Control Entry Is Corrupt” Error On Windows?
Method 7: Update Windows
The final method to fix this error is to run all the updates available on your Windows PC. Here are the steps to update your PC:
Step 1: Press Win + I to open the Windows Settings.
Step 2: Click on the Windows Update tab in the left panel of the Settings window
Step 3: Next, click on the Check For Updates button in the right section and wait till all the updates appear on your screen.
Step 4: Click on the Download & Install button under each update and wait until the update process is complete.
Step 5: Click on the Check For Updates button again to ensure no more updates are remaining.
Step 6: Reboot your computer and check if the issue has been resolved.
Also Read: Best Ways On How To Fix Windows Resource Protection Found Corrupt Files
Bonus: Use Advanced Disk Recovery To Recover Files From Faulty Hard Disk
You can attempt to recover your data from the old hard disk using Advanced Disk Recovery if you are still experiencing the issue and must replace the hard disk. With the use of this software, you can retrieve data that has been inadvertently erased, corrupted data from hard drives, and even files and folders from formatted drives. Memory Cards, USB Flash drives, and external devices are all supported. By connecting the problematic hard drive to another PC using the appropriate hard disk socket, you can download and install this software to scan it. You can recover files and folders onto the backup PC with the aid of this tool.
Also Read: Data Recovery Tips: Do’s & Don’ts While Performing Data Recovery
The Final Word On How To Fix DISM /online /cleanup-image /restorehealth Is Stuck
The DISM/online /cleanup-image /restorehealth command has many benefits which include restoring corrupted system images. The command starts the scanning procedure, which takes a long time to finish. But it’s also possible for it to become stuck at 0%. The best solutions to the “DISM /online /cleanup-image /restorehealth is stuck” problem was covered in this tutorial.
Please let us know in the comments below if you have any questions or recommendations. We would be delighted to provide you with a resolution. We frequently publish advice, tricks, and solutions to common tech-related problems. You can also find us on Facebook, Twitter, YouTube, Instagram, Flipboard, and Pinterest.