It’s easy to identify, as seen by Windows failing to launch after appropriately turning on your machine. Instead, the machine will fail to reach the login page before rebooting and attempting to reinstall Windows. This is what it means when Windows becomes stuck in an endless cycle of booting and crashing. In past versions of Windows, an infinite boot loop might have necessitated a full reinstall or at the very least considerable fiddling. A reboot loop can be handled quickly thanks to the way Microsoft designed Windows 10.
How To Fix A Windows 10 Infinite Reboot Loop
Method 1: Remove Any Removable Devices From the Computer
The first thing you should do is unplug all of your computer’s peripheral devices, such as printers, pen drives, speakers, and so on. Because these gadgets could be the cause of a faulty startup in some situations.
You’ll now do a hard reboot, which is a method of rebooting the computer using hardware rather than operating system software. After you’ve disconnected your computer’s peripherals, hold down the power button for around five seconds. The computer will be turned off. Wait around 30 seconds before pressing the power button to restart your computer. It ought to begin properly.
Method 2: Activate Safe Mode Manually
Safe mode can be accessed from within Windows 10 in some instances. If the reboot loop is initiated by the activation of a certain software or associated hardware, this will be possible. You have three alternatives to restart Windows 10 in safe mode before the reboot is triggered:
Step 1: To launch Windows 10 into Advanced startup options, hold Shift and then Start > Restart.
Step 2: You can alternatively go to Settings > Update & Security > Recovery > Advanced startup > Restart now.
Step 3: In a command prompt with enhanced privileges. To reboot the PC into the Advanced Boot settings, type shutdown /r /o followed by Enter.
Method 3: To Get Into Safe Mode, Use the Installation Media
If you can’t go into safe mode, you’ll need to utilize installation media. Users of Windows 10 should create a recovery partition on their hard drive. If you don’t have access to a computer, you can create a USB or DVD recovery drive by downloading the Windows 10 installation media. It should be noted that this will have to be done on a different computer.
All you have to do to get Windows 10 out of the reboot loop is insert the installation media. Alternatively, identify the boot manager in the UEFI/BIOS (tap Del, F8, or F1 when the system boots).Restart the computer after selecting the recovery partition as the primary drive.
Method 4: Uninstall App/Game That You Might Have Installed Before Infinite Loop
Is it possible that the boot loop is caused by the installation of an app or game. In any case, deleting the app will cure the problem. Simply locate the program in the Start menu, right-click it, and select Uninstall. The boot loop problem should be resolved after restarting Windows 10.
Method 5: Stop Boot Loops in Hardware Drivers
If the system is stuck in a boot loop owing to hardware drivers, you can fix it in safe mode by following the steps below:
Step 1: Select Device Manager from the Start menu by right-clicking it. Look for the suspect device here.
Step 2: Roll back the driver by right-clicking the device, going to Properties > Drivers, and selecting Roll Back Driver.
Step 3: Otherwise you can also right-click on the device and select Disable Device, then Uninstall Driver.
Method 6: Restore Windows
This procedure will only work if you’ve been able to start your computer in safe mode.
A faulty history can create a variety of problems in Windows, including the endless reboot problem. System Restore restores your computer’s files to a previous state when everything was working properly.
Step 1: Type Create a restore point into the Start menu search field and choose the Best match option.
Step 2: From the System Protection menu, choose System Restore. To restore your previous settings, select a specific restore point and click Next.
Note: You must have previously made a restore point for this to operate. This strategy will not work for you if you don’t have a point created.
Advanced System Optimizer is a multi-module optimization program that takes care of a variety of computer issues. All of these modules are intended to boost your computer’s efficiency and performance. Advanced System Optimizer can fix problems with the Control Panel, the Desktop, the Taskbar, and Windows File Explorer, to name a few. This utility, unlike any other application, helps you create a System Restore point to the given location. You can create as many points as you want and restore your computer to a working state.
Method 7: Fix the Infinite Boot Loop in Windows 10 by Doing a Factory Reset
If you can’t get into safe mode or the solutions don’t work, the factory reset is your last option. This procedure essentially reinstalls Windows 10, giving you a fresh start. Just remember to make a backup of your personal information first!
The Final Word on How to Fix a Windows 10 Infinite Reboot Loop
Windows has long had a problem with reboot loops. While prior versions of the software included a few choices for recovery, they were far from complete. Fortunately, Windows 10 includes excellent recovery and restoration capabilities, making a boot loop problem simple to resolve. It’s best to take measures for future bugs and difficulties after you’ve successfully fixed the Windows 10 infinite reboot cycle problem.
Follow us on social media – Facebook, Instagram, and YouTube. For any queries or suggestions, please let us know in the comments section below. We would love to get back to you with a solution. We regularly post tips and tricks, along with answers to common issues related to technology.