9 Fixes For Windows 10 Can’t Connect To This Network

For Windows 10 How-To PC Optimization

“Windows 10 can’t connect to this network” is one of the common issues faced by Windows users when they try to connect to a network. Besides, telling you cannot connect the error doesn’t explain anything more. This makes resolving errors difficult.

Hence, to help fix can’t connect to the network here we will enlist 7 best ways. Using them, one by one, you can easily troubleshoot the problem and connect to your chosen network on your PC.

Writer’s  Tip

To optimize PC and to solve various PC-related problems, we suggest using Advanced System Optimizer.

This software helps update outdated drives, clean malware infections, remove junk files, recover accidentally deleted files, and more thereby helping boost system performance to the maximum.

ASO Overview

You can use it and fix PC issues in 3 easy steps:

1. Download, install and run Advanced System Optimizer

2. Click Start SmartPC Care and find Windows issues

3. To fix detected errors hit Optimize Now.

Used worldwide by millions of users this best PC optimizer and cleanup tool works flawlessly and helps fix mostly all Windows related problems.

Complete review Advanced System Optimizer

How can I fix Windows 10 network connection errors?

Method 1 – Update network adapter drivers

Sometimes due to an outdated network driver, you might face issues with the wireless network. To fix this error, we need to update the faulty drivers

Note: To update drivers, you need a device with an active internet connection.

To update network drivers, you can either visit the manufacturer’s site or can use the best driver updater utility. Once the driver is downloaded, you can copy it on a USB and then can install it on the device on which you face can’t connect to a network error.

Once the latest driver is installed the issue will be fixed.

But doing so manually will be a time consuming and tedious job. Also, all users aren’t tech-savvy and might end up installing incorrect drivers. Therefore to avoid all this from happening, we suggest using an automatic driver update tool.

For this, you can use the Driver Updater module provided by Advanced System Optimizer. To use it, follow the steps below:

1. Download, install and run Advanced System Optimizer.

2. Launch the PC Optimization software.

3. Click Windows Optimizers and scan the PC for faulty or outdated drivers.

4. Update the network driver and wait for the process to finish.

Note: To update all drivers you will have to upgrade to the Pro version.

  1. Once the driver is updated, restart the system and see if the error, can’t connect to the network problem is resolved or not.

Method 2 – Uninstall Network Adapter

Even after updating the driver if you are unable to go online, then we suggest uninstalling and reinstalling the driver. To do so, follow the steps below:

1. In Windows search, type Device Manager

2. Select the search result to open the Device Manager.

3. Look for the network adapter, double click to unhide the driver.

Windows 10 network connection errors

4. Select it, right- click > Uninstall device

Windows 10 network connection errors

5. Restart the system after uninstalling the driver, this will help Windows to automatically install new network drivers.

Now try checking your PC the error should be resolved. If not, let’s move to the next step.

Method 3 – Alter network adapter’s channel settings

1. Type Control Panel in the Windows search bar

2. Click Network & Internet

Alter network adapter's channel settings

3. Network and Sharing Center

Network and Sharing Center

 

4. Change adapter settings

Change adapter settings

5. Look for your wireless adapter > right-click > Properties

Look for your wireless adapter

6. Click Configure > Advanced tab.

7. Select the 802.11 channel width and edit the value. (Changing value to 20 MHz has helped several users.)

8. Save changes by clicking OK

Method 4 – Forget The Network & Reconnect To It

To some users, the idea of forgetting the network and reconnecting might sound lame, but this obvious step is missed most of the time. Hence, if none of the steps have worked so far, there’s no harm in using this fix.

To learn how to do that, follow the steps below:

1. Head to the system tray and look for the network icon.

2. Right-click > Open Network & Internet settings.

3. Click the Wi-Fi option in the left sidebar and view wireless adapters.

4. Next, hit Manage known networks and view all networks.

Forget The Network & Reconnect To It

5. You can now see a list of all networks you have ever connected. Click the one using which you are facing problem > right-click hit Forget button

Forget The Network & Reconnect To It

6. This will remove the network from the list. To reconnect scan > enter password and try connecting to the network.

Method 5 – Enable Disable Flight Mode

While using a smartphone when you face a network issue toggling Airplane mode is suggested, the same can be done in Windows when facing “Windows 10 can’t connect to this network”

To learn how to do that, follow the steps below:

1. Open Windows Action center by clicking the notification-like icon at the bottom-right corner

2. Click the Flight mode option and turn it on.

3. Once enabled wait for a minute and then disable it.

Enable Disable Flight Mode 

4. Reconnect to your network the issue should now be resolved

Method 6 – Run CMD Commands To Fix The Issue

The “Can’t connect to network” error can be due to IP address conflict or due to DNS cache. To fix such issues, Microsoft recommends releasing IP addresses and flushing the DNS cache.

To learn how to do that follow the steps below

  1. Open elevated Command Prompt 
  2. Next, in  Command Prompt window copy paste following commands one after the other. Make sure you press the Enter key after entering each command.

netsh winsock reset
netsh int IP reset
ipconfig /release
ipconfig /renew
ipconfig /flushdns

3. Let the commands run and then restart the system, this should fix network not connected errors on Windows.

Method 7 – Reset Your Network Settings

Incorrect network configuration can also lead to “Windows 10 can’t connect to this network”. To resolve it, resetting network settings is the right decision.

To do so, follow the steps below:

1. Press Windows + I

2. Look for Network & Internet option

Reset Your Network Settings

3. Select Status from the left sidebar

Select Status from the left sidebar

4. Scroll down and look for Network reset option.

Network reset option

5. Click on the Reset now button to reset your settings.

Click on the Reset now button

Method 8 – Disable IPv6 On Your PC

To fix Windows 10 can’t connect to network error, try disabling IPv6 on your system. This will not affect any system functionality unless you are working on something with the required IPv6.

1. Look for the Network icon in the system tray.

2. Right-click > Open Network & Internet settings.

Look for the Network icon

3. Change adapter options

Change adapter options

4. In the new window that opens look for Wireless name,> right-click > Properties.

opens look for Wireless name

5. Uncheck the box next to Internet Protocol Version 6 (TCP/IPv6). This will disable IPv6 > Ok.

Internet Protocol Version

6. Check the system the problem should now be resolved.

Method 9 – Use The Network Troubleshooter

If nothing has worked so far, then the last resort is to use the built-in network troubleshooter. This will help fix the underlying issues. To use it, follow the steps below:

1. Press Windows + I

Use The Network Troubleshooter

2. Select Troubleshoot > Additional troubleshooters

Additional troubleshooters

3. Network Adapter > Run the troubleshooter

Network Adapter

4. The troubleshooter will now look for a problem and will fix it.

So, this is all using these simple fixes you can easily resolve: “Windows can’t connect to this network” and can connect to the Internet again. In case you are unable to fix the issues using the best fixes explained above do let us know in the comments section. In addition to this, those who can fix the issue let us know which one worked for you in the comments section.

4 COMMENTS

  • Mansi Vijay
    Updating the network adapter driver is probably the best fix to resolve the Windows 10 issue! Thanks a lot for all the other solutions!

    6 months ago Reply
  • Anamika Sinha
    I was facing this issue for a long time

    6 months ago Reply
  • Lucy Taylor
    For optimize PC and to solve various problems, advanced System Optimizer is best so far.

    6 months ago Reply
  • Mridula Nimawat
    What if it fails to connect to any network, is there a offline method to update network adapters?

    6 months ago Reply

Leave a Reply


The Firefox logo isn’t a fox

It is a common misbelief that the furry creature in the Firefox logo is a fox thanks to its name. But it is rather a Red Panda.