Blog Summary – If your computer is showing an error message – Hard Drive Not Installed, you might not be able to operate the system normally. Use MiniTool Partition Wizard to fix the problem quickly.
When you boot up your system and get an error message – Hard Drive Not Installed, it can be alarming. It was reported that HP, Lenovo, and Dell users have been the most affected by this system error. Let’s study the issue and probable causes to find the solutions in this blog post.
The most possible reasons for this are bad BIOS settings, corrupted hard drive registry, bad Windows installation, boot sector virus, or physical damage to the system.
Methods to fix hard drive not installed on Windows 10
If you are getting an issue such as a hard drive not installed on boot up, follow these steps as the preliminary action.
- Rebooting PC – As sometimes a temporary glitch can occur due to system errors and it can be resolved by rebooting the PC. If you are not able to see the error message, then you can move on with your work. If you are not able to see the Restart option, try Hard Reset by pressing the Power button. This will turn off your computer and now turn it on again.
- Check Physical connections – This is one of the most common problems when getting the hard drive not installed error message. You might want to check all the cable connections and ports for damage. You can also check the hard drive for any such physical damage.
Also Read: Fixes “Unable To Reset PC. A Required Drive Partition Is Missing” Error
Once you are sure, these are not causing you the hard drive not installed error on your Windows PC, it’s time to find a solution.
1. Press F1 to boot Windows –
If it is a hard drive not installed on Dell computer issues, then obviously you will need a specific command. For Dell users, the F1 command will help you enter setup. This will need you to verify the BIOS configuration on your computer. Here you can change your hardware settings and then boot.
2. Check BIOS settings –
When the hard drive is not installed on your computer, it is possible that it got disconnected. By entering the BIOS settings, you will be able to check the setup and check for the hard drive in the list. Restart your computer and press F2 to enter the BIOS settings interface. Here check for the correct date and time and then enter the Boot mode. Ensure that the boot mode is set to Legacy.
3. Hardware diagnostics –
Dell Hard drive not installed error can be solved with this method. As all Dell computers have a built-in tool for hardware diagnostics, we use it to check the functionality of your computer. Restart your computer and then press F12 continuously and then select Diagnostic from the BIOS menu. Follow the on-screen instructions and then you will be able to diagnose the error code.
4. Windows Startup Repair –
It is also possible to have a Windows installation error on your computer which ends up showing you a Hard drive not installed error message. To fix it, we can run the Startup Repair. It is advisable to create a bootable USB from ISO Windows before a clean install.
Now to repair your computer, go to the Troubleshoot and open Advanced Options. In this interface, choose Startup Repair to fix Windows startup-related problems.
5. Test hard drive –
When none of the above work, it might be possible to have issues with your hard drive. To check if your hard drive has some bad sectors, we run a Partition Manager to check it. Here, we recommend using MiniTool Partition Wizard as it will let you partition the hard drive and check it.
MiniTool Partition Wizard is one of the most efficient partition managers for Windows PC. It is capable of creating, cloning partitions along with running a disk benchmark and migrating OS for your computer. Follow the steps below to test the hard drive using it –
Step 1: Download MiniTool Partition Wizard from the download button below-
Step 2: Complete the installation and then launch the application.
Step 3: Select the disk and right-click on it. Now choose Surface Test and click on Start Now. The tool will diagnose the hard drive and show the bad sectors marked in red.
Step 4: Now, if bad sectors are found you can take two actions – Shield Bad sector or replace the hard drive.
When it is possible to skip on the bad parts of the hard drive, you can mark these blocks as unusable. This step will help you skip and fix the hard drive not installed error. To fix this, you need to run the following commands on the Command Prompt CHKDSK /R to scan the hard drive-
Step 1: Type Command Prompt on the search bar in the Start Menu and Run as administrator.
Step 2: Type the following command and press enter.
Chkdsk D: /f /r /x
Now, wait for it to yield results, and then you can check if it fixes your hard drive not installed issues. If not, it means you will require to replace this faulty hard drive.
To clone the hard drive, you will need to download cloning software for your computer. Here we use MiniTool ShadowMaker which will help you Clone disk easily. This will quickly transfer all the data on your hard drive, including the Windows Settings, system files, registries, applications, and more to another hard drive. Connect another hard drive to your computer and then perform the following steps –
Step 1: Download MiniTool ShadowMaker from the download button given below –
Step 2: Launch the application after completing the installation.
Step 3: Go to Tools and click on Clone Disk and then select the hard drive as the source and new hard drive as Target. Click on Ok.
Step 4: This process will take some time and then you will need to disconnect the target disk. Once you are done cloning the disk, you can use it to boot your computer and reinstall the operating system using the new hard drive.
Frequently Asked Questions –
Q1. How to fix the hard drive not installed error on the laptop?
To fix the problem, you will need to try out the hard drive diagnosis using a dedicated tool such as MiniTool Partition Wizard. Other methods include Startup Repair and changing the BIOS settings.
Q2. Why is my Dell hard drive not installed?
Dell hard drives not installed is an error that can occur due to many reasons like corrupted registry, BIOS settings, physically damaged hardware.
Q3. Why does my computer say the hard drive is not found?
It is possible to get the hard drive not installed error on your computer for multiple reasons. Windows installation problem, system errors, physical damage, bad cable connection.
Q4. What to do if your hard drive is not recognized by Dell?
Use DellSupportAssist to fix the issue and if it does not work, you can try out the aforementioned ways to resolve the problem.
Wrapping Up-
If you are having trouble with your computer with the error message – hard drive not installed, it can be frustrating. This can be resolved using multiple methods as mentioned above. The best way to fix it is to try out the troubleshooting on your computer. If it does not work and the hard drive is faulty, you must use MiniTool Partition Wizard to fix the problem.
We hope this article will help you learn how to fix a hard drive not installed on your computer. We would like to know your views on this post to make it more useful. Your suggestions and comments are welcome in the comment section below. Share the information with your friends and others by sharing the article on social media.
We love to hear from you!
We are on Facebook, Twitter, and YouTube. For any queries or suggestions, please let us know in the comments section below. We love to get back to you with a solution. We regularly post tips and tricks along with solutions to common issues related to technology.
Related Topics-
How to Fix Service Control Manager Error on Windows 10
Cannot Add a New User Account on Windows 10? Here’s the Fix!
Disk Management Not Loading on Windows 10? Here’s the Fix!
How To Clear Memory and Boost RAM on Windows