Driver

Simple Steps to Fix Driver Power State Failure on Windows 10, 8, 7

Blue Screens can occur on your Windows 10 due to several reasons. If you are getting Driver Power State Failure on your Windows 10, 8, 7, it could be due to corrupted, incompatible driver or hardware. In some cases, power settings can also cause stop code driver power state failure.

Luckily fixing 0x0000009f driver power state failure is simple. You can use Advanced Driver Updater, Smart Driver Updater, Winzip Driver Updater, or other best driver updater tools to update your drivers.

Depending on what caused driver power state failure error, you can fix it with either a simple system restart or can use the solutions explained below:

How to fix Driver Power State Failure Windows 10

Method 1: Update drivers

To update drivers, you can use Advanced Driver Updater – the best driver updater that scans your system for incompatible and outdated drivers and updates them.

Install Advanced Driver Updater.

Once installed, run a scan upon scan completion, click on Updater All, or can only update graphics drivers.

This should fix the problem.

However, if you are DIY types, you can do it manually, too, but remember it is time-consuming.

To learn how to use Advanced Driver Updater in detail, read further.

Method 1: Update drivers

Method 2: Enter Safe mode and remove recently installed drivers

Method 3: Perform SFC Scan

Method 4: Edit System’s Power Settings and Power Plan Settings

Method 5: Temporarily Disable Security Software

Method 6: Undo Graphic Card Driver Update

Method 1 – Update system drivers

After encountering driver_power_state_failure windows 10 error message if you can log in to your system, you can follow the steps below:

  1. Download and install Advanced Driver Updater
  2. Once installed, Advanced Driver Updater will run an automatic scan to check installed driver versions against its database for the latest driver version. Wait for the scan to finish.
  3. After the scan is completed, Advanced Driver Updater will list all outdated and corrupt drivers. Review the list to decide if you want to update all drivers at once or do it individually. To update one driver at a time, click Update driver next to the driver’s name. However, if you are satisfied with the results, you can update all drivers at once by clicking Update All.

Note: To update some drivers, you might have to follow some manual steps.

Disclaimer: Not all the functions of this tool are free.

Stop code driver power state failure should now be resolved, even after updating the driver if you still face the problem move to the second step.   Additionally, if you want to update the driver manually, click here.

Method 2: Enter Safe mode and remove recently installed drivers

To boot in safe mode on Windows 10, restart the PC and hold the power button for 5 sec until the system shuts down again. You’ll need to repeat the process until you see an Automatic Repair Screen. Once done, click on Advanced options. To learn how to boot in safe mode in detail click here

Upon entering Safe Mode delete recently installed driver by following the steps below:

  1. Type Device Manager in the search bar.
  2. Now, look for the recently installed graphic driver. Right-click > Uninstall device.

Restart your Windows 10 in normal mode to see if Driver Power State Failure Windows 10 is resolved or not. If the problem persists, try uninstalling another recently installed driver by again booting in Safe Mode.

Note: Once you can identify the problematic driver head to the manufacturer’s site to download an updated version of the driver that is compatible with your Windows operating system.

If you don’t want to go through all this hassle, you can use the best driver updater tool.

Method 3: Perform SFC Scan

Even after uninstalling the latest installed driver you are getting Stop Code Driver Power State Failure, you might need to perform an SFC scan.

To do so, follow the steps below:

  1. Type Command Prompt in the search bar.
  2. Right-click the search result and click Run as administrator.
  3. Once the command prompt window opens, type SFC/scannow and press Enter.
  4. This will start the scanning process. The process might take about 10 minutes, so wait for it to complete.

This should fix driver_power_state_failure Windows 10  error. However, if it doesn’t work, run a DSIM scan. To do so, follow the steps below:

Assuming you are still running Command Prompt as administrator instead of typing SFC/scannow you need to enter

DSIM.exe /Online /Cleanup-image /scanhealth

DSIM.exe /Online /Cleanup-image /Restorehealth

Upon running both the command check 0x0000009f Driver Power State Failure should be fixed.

Method 4: Edit System’s Power Settings and Power Plan Settings

In some case, Driver Power State Failure occurs on Windows 10,8,7 due to power settings. To fix this, you need to disable a few power settings. To do so, follow the steps below:

  1. Type Control Panel in the search bar.
  2. When the Control Panel window opens, look for Power Options.
  3. In the consecutive window, look for Choose what the power button does in the left pane.
  4. Click Change settings that are currently unavailable.
  5. Uncheck the box next to Turn on fast startup (recommended), Sleep, & Hibernate options > Save changes.

In addition to this change, make changes to power settings.

  1. Head to Power Options > under preferred plans, click Change plan settings option next to the selected option.
  2. Change advanced power settings > from the list of options you see click Sleep section and ensure Sleep, Hibernation is set to Never. Under the Power button and lid section, ensure everything is set to Do nothing.

This should help fix Driver Power State Failure.

Method 5: Temporarily Disable Security Software

Certainly, antivirus helps stay safe from infection, but sometimes it can cause Stop Code Driver Power State Failure. Therefore, to fix the problem, try disabling antivirus for some time and check if the issue is resolved. If this fixes the problem, you will have to uninstall the antivirus software.

Method 6: Roll Back Graphic Card Driver Update

  1. Type Device Manager in the search bar.
  2. Head to Display adapters > double click graphics card.
  3. This will open the Properties window. Here click on Driver tab > Roll Back Driver.
  4. Wait for the process to finish

If the Roll Back option is disabled, you’ll need to uninstall the device.

After following these steps check Driver Power State Failure Windows, 10 should now be resolved.

FAQs – How to Fix Driver Power State Failure on Windows 10

Que.- What causes a driver power state failure?

Ans.- Driver Power State Failure error is generally caused by a PC or device driver going into sleep mode when the device is in use. This means when Windows sends a signal to the device, and it doesn’t respond in time, Windows displays Driver Power State Failure BSOD error on Windows 10,8,7.

Que.- Are there any specific cases of Driver Power State Failure error?

Ans.– As reported by other users, 0x0000009f driver power state failure can occur if there is a driver related issue. On Toshiba, Alienware, Samsung, Acer, Lenovo, devices running Windows 10, you can also face driver_power_state_failure windows 10.

Besides, if you are using Nvidia graphics, you can encounter Driver Power Failure Nvidia. To fix it head to Nvidia Control Panel > Manage 3D settings > select preferred graphics card > Power management mode > prefer maximum performance > save change.

If you are a specific USB, you can get Driver State Failure USB error. To fix it, disconnect the USB devices and find the one that is causing the problem.

This is all for now. After following the aforementioned steps, you should be able to fix Driver Power State Failure on Windows 10, 8, 7. If you have any questions or some other steps worked for you, do write to us. We will make sure we add them and share them with our readers.

Leave a comment